Comes as a corner set to overhaul and upgrade the front brakes of your GT3. This includes bell, disc, stainless steel bolts and bobbins and the caliper spacer to allow fitment.

 

Why buy Alcon? 

 

Alcon S grooves perform three basic functions:

-Increases initial friction between the rotors and pads, producing more “bite”

-Continuously refreshes the brake pad surface by removing debris from the pad

-Prevents build up of gas from the phenolics within the pads

 

Traditional slotted or drilled rotors include arrays of long, straight, or curved grooves staggered around the rotor s surface. Heat generated during braking leads to thermal distortion of the rotor, due to the incohesive friction rubbing produced by the grooves. This causes reduced pad contact and in some cases brake judder or shake. Alcon saw this, and with their breakthrough design they moved the grooves into short segments, thus continuous rotor contact area is maintained, helping to reduce thermal distortion and brake judder.

 

The curved form of each groove produces a longer edge than would otherwise be achieved if the grooves were straight. The grooves are also overlapped radially, which prevents grooving of the friction material and longer pad life. When compared with a blank rotor, Alcon s grooved rotor will produce greater pad wear and will also be noisier; but when compared with a cross-drilled rotor, initial bite will be similar without the thermal stress.

 

For:

Porsche 997 GT3 Gen 2- 2009-2013

 

380x33mm Disc

 

LEFT

Alcon Part Number: DIA2202X007S36L

 

Be sure to check out the range of Brake Pads and Line upgrades we offer which will further enhance your braking experience!

 

Note:

The photo may not represent actual item e.g could be of a LH disc when ordering a RH.

 

These discs are handed and sold individually please see our store for opposing side

Porsche 997 GT3 Gen 2 Alcon Replacement LEFT Front Brake Disc & Bell - 380x33mm

£1,102.67Price
    <